How to realize 4k×1k mapping, How to realize different pixels mapping – RGBLink VSP 5162PRO User Manual

Page 14

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax:00865925771202

Email: [email protected] http://www.rgblink.cn

2. Push the [MENU] button to enter to the menu items, push the [UP/DOWN] button, and choose

3. Push the [SEL] button to confirm. Push the [LEFT/RIGHT

] button, choose “ON”, and enable the split

function.

4. Push the [UP/DOWN] button, choose , push the [SEL] button to confirm.

5. Set H TOTAL as 4096, V TOTAL as 1152, FIRST WIDTH as 2048, and 4K×1K mapping is finished.

1. Push the [MENU] button to enter to the menu items, push the [UP/DOWN] button, and choose

2. Push the [SEL] button to confirm. Push the [LEFT/RIGHT

] button, choose “ON”, and enable the split

function.

3. Push the [UP/DOWN] button, choose split mode, push the [SEL] button to confirm.

4. Push the [SCALE] button, and enter to the split image.

5. Choose the split image that need to scale, push the [SEL] button to confirm.

6. Scale the split image according to actual need.