RGBLink VSP 5162PRO - Manual (Page 12)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
11
How to Realize the Text Overlay Setting
Before setting the text overlay, please make sure the input channel of the text. For example, choose
DVI3, the operations are as follows:
1. Choose the image input signal in Preview area, for example, choose SDI1.
2. Push the [MENU] button, push the [UP/DOWN] button and choose option, push the
[SEL] button to confirm. Again push the [UP/DOWN] button and choose option,
choose and set “ON” to enable the DSK function.
3. Push the [UP/DOWN] button and choose , push the [SEL] button to confirm, choose the text input signal, for example, choose DVI3. 4. Set the size and position of DVI3: Push the [DVI3] button in Preview area, the button light is on, and the image can be edited, push the [SCALE] button to set the size. 5. Push the [MENU] button, push the [UP/DOWN] button and choose option, push the [SEL] button to confirm. Again push the [UP/DOWN] button and choose option. Push the [UP/DOWN] button and choose , push the [SEL] button to confirm, choose the preset mode, for example, WhOnBk2, push the [SEL] button to confirm. 6. Push the [SAVE] button, and save the above settings. How to Realize Mirror and Rotate Setting 1. Push the [MENU] button, and enter the menu items. 2. Push the [UP/DOWN] button, choose , push the [SEL] button to confirm.
choose the text input signal, for example, choose DVI3.
4. Set the size and position of DVI3: Push the [DVI3] button in Preview area, the button light is on, and
the image can be edited, push the [SCALE] button to set the size.
5. Push the [MENU] button, push the [UP/DOWN] button and choose option, push the
[SEL] button to confirm. Again push the [UP/DOWN] button and choose option. Push
the [UP/DOWN] button and choose , push the [SEL] button to confirm, choose the preset
mode, for example, WhOnBk2, push the [SEL] button to confirm.
6. Push the [SAVE] button, and save the above settings.
How to Realize Mirror and Rotate Setting
1. Push the [MENU] button, and enter the menu items.
2. Push the [UP/DOWN] button, choose
3. Push the [UP/DOWN] button, choose , push the [SEL] button to confirm.
PROGRAM 90 ROTATE: Push [LEFT/RIGHT] button, user can choose NO ROTATE, LEFT ROTATE
and RIGHT ROTATE.
LEFT ROTATE: