RGBLink MSP 200 Quick Start - Manual (Page 7)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
6
How to Connect
Connect the SDI Monitor and other device with SDI input port to the SDI output interface
using the SDI cable.
Connect the player and camera with CVBS input port to the CVBS output interface using
the CVBS cable.
Connect the DVI player or the computer with DVI input port to the DVI+VGA output interface
Using the DVI cable.
Connect the device with GENLOCK input port to the GENLOCK output interface port using
the SDI cable.
Connect the computer to the USB control port of sending card using the USB cable.
Connect the microphone or other devices to an audio interface with 3.5mm headphone cable.
Plug in power cord with IEC connector. Use for battery charge, this device uses battery S-8972, LIB
7.2V, 6.6Ah 47wh, compatible with SONY NP-F970 NP-F770.
How to Work
Switch ON the power button, the touch screen display the menu items. Touch on the touch screen, user
can choose the menu. When the battery gets weak, charge the battery in time to make sure the device
is in normal operation.