RGBLink MSP 200 Quick Start - Manual (Page 3)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
2
Product Introduction
MSP 200 is expecially designed for the audio and
video system integration application engineer and
designer, with its high quality and standardlization
interface and resolution. User can use MSP 200
to test back end audio and video system by its
fully equipped interfaces, and standard resolution
support.
MSP 200 equips standard composite, component,
VGA, DVI, HDMI and SDI interfaces, also
supports analog L/R audio and H/S output for
external Genlock reference signal.
MSP 200 builds in all kinds of standard test
patterns which compatible with SMPTE and
VESA standards.
MSP 200 also embeds Time code for frame
delay test application. It is fully operation by
Touch Panel, and user can calibrate the touch
panel in need.
MSP 200 can be power on by external power
module and also can use battery. And external
power module can charge battery too.
System Connection
RGBlink offers solutions to
demanding technical problems.
Any application questions, or
required further information,
please contact with our
customer Support Engineers.
MSP 200 Controller System Connection Diagram