RGBLink DXP V1616 User Manual - Manual (Page 46)

DXP V1616 User Manual 46
Read and write communication address (not IP address):
Symbol Byte Definition Note
CMD 1 0x6A （Regulate other function）
DAT1 1 0x20(write) 0x21(read) Local address
DAT2 1 0~99(Local address) 0 means
broadcast address
DAT3 1 0(no use)
DAT4 1 0(no use)
Local address is default for 0
LOGO Information Setting:
Symbol Byte Definition Note
CMD 1 0x68
DAT1 1 0xf2
DAT2 1 0(no use)
DAT3 1 0(no use)
DAT4 1 0(no use)
PC send: +128BYTE (block data) +1BYTE
(checksum)
Lower PC reply:
Block data content: 0-15 customer and manufacturer information
20-35 customer and device information
Information not reach 16 bytes will be filled by '\ 0'
LOGO Display Parameters Setting:
Symbol Byte Definition Note
CMD 1 0x68
DAT1 1 0xf3
DAT2 1 1/0 Open/Close LOGO display
DAT3 1 1/0 Display/Cancel display customer
LOGO
DAT4 1 1-10 boot LOGO display time (second)
Customer LOGO Display Parameters:
Symbol Byte Definition Note
CMD 1 0x68
DAT1 1 0xf0