RGBLink DXP V1616 User Manual - Manual (Page 24)

DXP V1616 User Manual 24
【 Mode】Audio and video switching key, used to select 3 modes,
such as "Audio and video sync switching AV", "Audio switching A",
"Video switching V", it is default for "Audio and video sync
switching AV".
For example: when select "MODE" for "V", it means it is only video
matrix currently and audio keep still. "2" + "4" + "ENTER", means
video 2 is separately switched to output 4. (This function is not
immediately available for V1.0 version).
【 Enter】confirm button, when functional input is confirm button,
and press 【 Enter 】 before enter menu, it displays the current
input/output state, "/" means empty, and not choose input signal
source.
【 Rec】Call saving mode selection key, can call saving user mode,
range for: 【0】~【24】】, a total of 25 kinds of call saving mode.
For example: Push【Rec】→【3】→【Enter】, it means call saving
mode3.
Note
【 O 】 is the default input and output
one-to-one saving mode. That is input
【
1 】 is corresponding to output【 1 】,
input【 2 】 is corresponding to output
【
2 】…
【 Save】Saving modes selection key, can save all current switching
channels and current states, range for: 【 1 】~【 24 】, a total 24
kinds of saving modes.
For example: Push【Save】→【6】→【Enter】, it means the current
state is saved to save mode6.
Note
If power fails suddenly, the device will
automatically save to the current using
mode, and do not need reset when power
on.