How to set up image zoom, How to realize test pattern, How to realize test pattern output and settings – RGBLink VSP 112U User Manual
Page 11
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
10
The image can be zoom in horizontal or vertical separately, to meet the special effects required.
Push the [MENU] button to go into the menu items, and turn the knob to go to ZOOM menu and push
the knob to confirm to go into ZOOM menu items as following:
V UP--Zoom in vertical and the image will be zoom in to the top direction from its bottom.
V DOWN--Zoom in vertical and the image will be zoom in to the down direction from its top.
V UP/DOWN--Zoom in vertical but in both top and down direction from its middle.
H LEFT--Zoom in horizontal and the image will be zoom in to the left direction from its right.
H RIGHT--Zoom in horizontal and the image will be zoom in to the right direction from its left.
H LIFT/RIGHT--Zoom in horizontal but in both left and right direction from its middle.
CENTER--Zoom in 4 corner direction from center.
How to Realize Test Pattern Output and Settings
Test Pattern is used to calibrate the screen or system, especially when there is not standard input
measure instrument. There are 66 kinds of test patterns for VSP 112U.
1. Push the [MENU] button and go into the main menu, turn knob and go to
2. Push the knob and go into the
3. Push the knob and go into the
or
0~255, and BLUE is from 0~255.
ready. If set the Test Pattern enable as auto switching mode. VSP 112U will output all the Test Pattern
one by one, and the interval between each is 1-10S.