How to set up the size and, How to set up the pip – RGBLink VSP 112U User Manual

Page 10

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197

Fax:00865925771202

http://www.rgblink.cn

Push the [SCALE] button and enter to the SCALE function menu. The button 0~9 are on, user can

adjust the size by the knob or number buttons.

H SIZE: Width setting.

V SIZE: Height setting.

H POS: Horizontal phase setting.

V POS: Vertical phase setting.

RESET: If image quality distorts by improper operation, it can be recover by reset.

Push the [MENU] button, and choose , push the knob to confirm. Choose PIP, and set “ON” to

enable the PIP function.

LAYOUT: User can choose 7 kinds of PIP layouts, here we take 3 layouts for example. The

corresponding results are as follows:

PIP L+T

PBP L+R

PBP T+B

SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the Image A and

Image B switching.

SELECT: Can choose to set the size or position of IMAGE A or IMAGE B individually.