Remotec ZXT-120 V1.1 - Manual (Page 5)

5
Glossary
Device or
Node
Devices and nodes are all terms to describe an
individual Z‐Wave device. These are all
interchangeable when setting up your Z‐Wave
network.
Inclusion Add a Z‐Wave device to the network.
Exclusion Delete a Z‐Wave device from the network.
Remove
To take a device out of a group, scene or
association group while that device still exists
in the same Z‐Wave network.
Z‐Wave
Network
A collection of Z‐Wave devices is controlled by
primary and secondary controllers operating
on the same system. A Z‐Wave network has its
own unique ID code so that controllers not in
the network cannot control the system.
Primary
Controller
The first controller is used to set up your
devices and network. Only the Primary
Controller can be used to include or delete
devices from a network. It is recommended
that you mark the primary controller for each
network for ease in modifying your network.
Secondary
Controller
A controller containing network information
about other devices within the network and is
used for controlling devices. Secondary
controller is created from the Primary
Controller and cannot include or delete devices
to the network.
Inclusion
Controller
A controller containing network information
about other devices within the network and is
used for controlling devices. Inclusion
controller is created from the Primary
Controller in a SIS enabled Z‐Wave network.
Inclusion Controllers have the ability to add
and remove devices from the network.