Remotec ZXT-120 V1.1 - Manual (Page 19)

19
Note 2: Before mounting to a wall, be sure to fully read the precautions.
1.
Obtain two screws suitable for the wall strength and material.
The screw size is shown in the figure below.
2. The positional relationship between the ZXT‐120 key holes and
the screw mounting positions are shown in the figure below.
Note 1: When mounting the screws to the wall, leave a space
between the wall and screw cap as shown in the figure.
3.
Insert the ZXT‐120 key holes onto the two screws mounted to
the wall, and then slide downward to secure in place.
4.
After securing the ZXT‐120 to the wall, connect the USB Power
or batteries and IR emitter cable to the ZXT‐120.