REMKO FBR-2 - Manual (Page 5)

5
Description
This remote control is an expansion
module for the heat pump manager,
which gives the user straightforward and
reliable control over the desired room
temperature and which allows the mode
to be changed. The weather-controlled
controller in the direct heating circuit
(heat circuit 1) can use the integrated
room sensor (optionally) to introduce a
change in room temperature in 0.3 K
steps. The rotary switch on the remote
control can be used to set the heat
pump manager to "Automatic opera-
tion", "Night mode", Day mode" and
"Summer mode".
Warranty
The warranty conditions are listed in the
"General terms and conditions".
Please contact your
contractual partner in the first instance.
Environmental
protection and recycling
Disposal of packaging
All products are packed for transport in
environmentally compatible materials.
Make a valuable contribution to reducing
waste and sustaining raw materials.
Only dispose of packaging at approved
collection points.
Disposal of
components
Equipment manufacture is subject to
continuous quality control. Only high-
grade materials are processed, the
majority of which
are recyclable. You can also
contribute to environmental protection
by only disposing of components in
accordance with local regulations and
in an environmentally safe manner, e.g.
through authorised disposal and recycling
specialists or at collection
points.
Intended use
Depending on the model, the equipment
and the additional fittings with which it
is equipped is only intended to be used
as an air-conditioner for the purpose of
cooling or heating the air in an enclosed
room.
Different or additional use shall not be
classed as intended use. The manufac-
turer/supplier assumes no liability for
damages arising from an unintended use
of the equipment. The user bears the sole
risk in such cases.
Using the equipment as intended also
includes working in accordance with the
operating manual and installation instruc-
tions and complying with the mainte-
nance requirements.