REMKO DN 32 - Manual (Page 5)

5
Heating mode flow direction
... after actuation: Flow direction: AB<->A
Valve in position AB<->A Actuator in position B<->B
(Heat pump in hot water or (B for "actuated")
in cooling mode)
Initial situation (resting position): Flow direction: AB<->B
Valve in position AB<->B Actuator in position A<->A
(Heat pump in heating mode) (A for "initial situation")
Hot water charging mode or cooling mode flow direction
ATTENTION
Before installation, make sure of the correct position of the valve axis (if necessary,
rotate the axis, indicator plate and spherical head screws 90° in accordance with
the top figure!