REMKO DN 32 - Manual (Page 2)

2
REMKO
3-WAY SWITCHING VALVE DN32
Carefully read the operating instruction
before placing the equipment in service.
It contains useful tips and notes
such as hazard warnings to prevent
injury and material damage. Failure to
follow the directions in this manual can
result in endangerment to persons, the
environment and the equipment itself
and will void any claims for liability.
■ Keep this manual in the vicinity of the
unit.
■ The unit should be set up and
installed only by qualified personnel.
■ The set-up, connection, and operation
of the unit and its components must
be in accordance with the operating
conditions stipulated in this manual
and comply with all applicable local
regulations.
■ Modification of equipment and
components supplied by REMKO
is not permitted and can cause
malfunctions.
■ Equipment and components may not
be operated in areas where there is
an increased risk of damage. Observe
the minimum clearances.
Safety notes
■ The electrical supply is to be adapted
to the requirements of the equip-
ment.
■ The operational safety of equipment
and components is only assured if
they are fully assembled and used as
intended. Safety devices may not be
modified or bypassed.
■ Do not operate equipment or compo-
nents with obvious defects or signs of
damage.
■ The equipment and components
must be kept at a safe distance from
inflammable, explosive, combustible,
aggressive and dirty areas or atmos-
pheres.
■ Installation, repair and maintenance
work may be carried out only by au-
thorised specialists. Visual inspections
and cleaning can be performed by the
operator as long as power is discon-
nected from the equipment.
■ To preclude any danger from the
equipment, take appropriate hazard-
prevention measures when perform-
ing installation, repair or maintenance
work or cleaning the equipment.