REMKO DN 32 - Manual (Page 3)

3
Description
The 3-way switching valve controls
the flow of process water or a separate
cooling circuit (four pipe system).
It is comprised of an electrical actuator
and a hydraulic lower section, the actual
valve.
Through its design the brass forged
3-way switching valve allows a
redirection of the medium, almost
entirely independent of the differential
pressure. The rotary valve of the 3-way
switching valve is equipped with
replaceable, glycol-resistant O-rings.
The 3-way switching valve is normally
controlled using an electric actuator.
During the installation work and
especially for the bleeding of the
heating system or for inspection
purposes, the 3-way switching valve
can also be operated manually. For this
purpose the electric actuator must be
removed.
The housing consists of corrosion-
resistant brass.
The connections have a 5/4" inside
thread on both the inlet and outlet
sides.
Guarantee
The guarantee conditions are listed in the
"General terms and conditions".
Please contact your contractual partner in
the first instance.
Environmental protection
and recycling
Disposal of packaging
All products are packed for transport
in environmentally friendly materials.
Make a valuable contribution to reducing
waste and sustaining raw materials.
Only dispose of packaging at approved
collection points.
Disposal of components
Equipment manufacture is
subject to continuous quality
control. Only high-grade
materials are processed, the majority
of which are recyclable. You can also
contribute to environmental protection
by only disposing of components in
accordance with local regulations and
in an environmentally safe manner, e.g.
through authorised disposal and recycling
specialists or at collection points.
This operating manual is a translation of the German original, Version W-08