REMKO RVS 60 H - Manual (Page 14)

Care and maintenance Shut-down
Temporary shut-down
1. Shut down the interior of the
system using the remote
control.
2. Shut the unit down either by
the internal controller or by us-
ing the remote.
3. Check the proportion (percent-
age) of glycol.
4. Check the unit for visible signs
of damage and clean it as
described in the chapter “Care
and maintenance”.
5. As much as possible, cover the
unit with a plastic foil to protect
it against the weather.
If only water and not a mix-
ture of water and glycol
is used, in regions subject
to freezing, water must be
drained from system when
it is not in operation The
drained water volume must be
replaced when system is put
back into operation!
! CAUTION
Permanent
shut-down
Ensure that equipment and com-
ponents are disposed of in accord-
ance with local regulations, e.g.
using certified firms and recycling
specialists or at collection points.
REMKO GmbH & Co. KG or your
contractual partner will be pleased
to provide a list of certified firms in
your area.
Regular care and maintenance of
the system will ensure trouble-free
operation and a long service life.
Prior to performing any work,
The system must be switched
off and isolated from the
power supply and secured to
prevent accidental switch-on!
! CAUTION
Wearing appropriate protec-
tive clothing is necessary when
working on the system.
! CAUTION
Care
■
Ensure the unit is protected
against dirt, mould and other
deposits.
■
Clean the unit using a damp
cloth. Do not use a jet (high
pressure).
■
Do not use any caustic, abra-
sive or solvent-based cleaning
products.
■
Clean the fins on the unit prior
to long shutdown periods.
Maintenance
■
We recommend an annual
maintenance contract with an
approved specialist company.
This ensures the operational
reliability of your system!
TIP
List of task
Checks / maintenance / inspection
Commis
-
sioning Monthly Half-yearly Yearly
General
•
Clean dirt traps
• •
Check medium charge
• •
Check circulation pump
• •
Dirt / damage condenser
• •
Check quality of the glycol • •
Measure voltage and current • •
Check direction of rotation • •
Check compressor • •
Check fan
• •
Check refrigerant charge
• •
Check condensation drain
• •
Test insulation
• •
Leak test for refrigerant cycle
• •
1)
The local law can require a
leak test of the cooling system
and the quantity of cooling
medium to be checked. In-
spection and documentation is
to be carried out by qualified
personnel.
NOTE
1) see note
REMKO RVS...H (INOX)
14