Quintum Technologies Tenor Call Relay 60 - Manual (Page 24)

P/N 480-0076-00-00 2-6
Chapter 2: Hardware Components
Cables
The cables listed in Table 2-4 are required to connect a Call Relay 60 to various interfaces. Contact
Quintum for ordering information, if necessary.
Table 2-4 Cables Supported
Cable Usage
RJ-45 Ethernet cable (grey) Connection to Ethernet LAN 10/100.
DB-9 Serial RS-232 (for use with CPU) Connection to PC’s asynchronous console
port.
Detachable (IEC) AC Power Supply Cord (for AC
units only) Connection to AC power jack.
RJ-45 Ethernet Cable (10/100)
An RJ-45 (10/100 Base-T) straight through cable is used to connect Call Relay 60 to an Ethernet
LAN. Cable pinouts are listed in
Figure 2-6 . Color specifications are applicable to the RJ-45 cable
provided.
Figure 2-5
8
1
1
8
Side View
Top View
RJ-45 Pin Order
Figure 2-6
Pin # Connects to Pin #
1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8
RJ-45 (10/100 Base-T) Connector Pinouts