Quintum Technologies Tenor Call Relay 60 - Manual (Page 22)

P/N 480-0076-00-00 2-4
Chapter 2: Hardware Components
Front Panel LEDs
The LEDs display the health of the system. There are different types of LEDS: LAN, Alert, and
Power. For LED definitions, see
Table 2-4 .
Figure 2-4 Front Panel LEDs
LAN LEDs
Power LED Alert LED
Table 2-3 Front Panel LEDs Definitions
LED Label LED Color Description
LAN1
LAN2 (LAN 2
is reserved for
future use)
Link/ACT Green On: Link is good.
Flashing: Line is working properly
and activity is on the line.
Off: Link has failed or no cable
attached.
100 Green On: Activity is being transmitted at
100 Mbps.
Off: Activity is being transmitted at
10 Mbps.
Power Power Green On: Indicates power is on.
Off: Power is off.
Alert Alert Amber Operational Status.
Off:
Call Relay 60 is working
properly.
On: One or more diagnostic tests
have failed.