Quantum Composers 9530 Series - Manual (Page 63)

9530/8530 Manual Version 4.8 Page 63
Fan Output Connector (J1
– Fan)

The recommended connector is Molex 4 pin female C-grid (Molex #50-57-9404) or
equivalent.

The recommended contacts are Molex female terminals with gold contacts (Molex #16-
02-0087) or equivalent.
Pin Number:
Connection: Specification:
1 (denoted by arrow on connector) +5 Volts DC 5 V±2%
2 +24 Volts DC 24 V±6%
3 N/C
4 Ground
USB Communications Connector (J3
– USB)

The recommended connector is a male USB Type B
Pin Number:
Connection:
1 Vbus + (+5 Volts DC)
2 Data -
3 Data +
4 Ground
RS-232 Communications Connector (J5 – RS-232)

The recommended connector is a male standard density D-Sub 9 pin connector
Pin Number: Connection:
1 N/C
2 Tx - Transmit
3 Rx - Receive
4 DTR - Connected to pin 6
5 Ground
6 DSR - Connected to pin 4
7 RTS - Connected to pin 8
8 CTS - Connected to pin 7
9 N/C
Ethernet Communications Connector (J7 – Ethernet Module)

The recommended connector is a male RJ-45 Jack

The pin out should be 568B or AT&T 258A
Pin Number:
Connection: Wire Color:
1 Tx + (Transmit Data +) Orange/White