Pse x technology, Compound bow – PSE Archery Bow 2014 User Manual
Page 8
PAGE
8
Compound Bow
USER’S GUIDE
PuLL-TYPE BOW PRESS:
This type of press pulls the riser of the bow in a vertical direction between
rollers that compress the limbs.
When using this type press it is very important to position the rollers and
pressure points correctly! See illustration above.
Back each limb bolt out the maximum number of turns indicated on your bow’s hang tag
and position the pressure points on the riser as close to the limbs as possible WITHOuT
making contact with the limbs as shown in the photo below.
THE PRESSuRE POINTS MuST NOT CONTACT THE
LIMBS AT ANY TIME DuRING SERvICING.
pse x technoloGy
uSING A BOW PRESS
PuLL-TYPE BOW PRESS
PuLL-TYPE BOW PRESS
X Technology continued on next page