PSE Archery Bow 2014 - Manual (Page 4)

PAGE
4
Compound Bow
USER’S GUIDE
General operatinG instructions
• Always inspect your bow thoroughly before each shooting session to insure that it is in good
working order. check for worn, loose or missing components and have them replaced at an
authorized PSE dealer as required, i.e. bushings, spacers, etc.
• Inspect your arrows to insure that they are straight, undamaged and that each nock is in good
condition. A cracked nock can break when fired from the bow and cause the bow to “dry fire”
resulting in possible injury to the archer and damage to the bow. Dry-firing is drawing and
releasing the bowstring without an arrow on the string.
• When purchasing arrows for your bow, consult the selection chart from the arrow manufacturer
and select the correct arrow for your application. Always use an arrow that is at least 5 grains per
pound of peak bow weight. Failure to do so could cause personal injury and damage to your bow.
bow maintenance
Your PSE bow will give you many years of use if maintained and cared for properly.
It is a mechanical device that is subject to wear and therefore must be inspected periodically and
given the proper adjustments and service. It is recommended that this service be performed at least
once a year by an authorized PSE dealer. All components, including string, cables, axles, e-clips,
limbs and riser should be carefully inspected for damage or wear.
STRINGS AND CABLES
Apply a light coat of high quality bowstring wax to your string and cable each time you shoot your
bow. It is especially important NOT to wax the area of the string that wraps around the idler wheel.
This area of the string should be treated with a cam lubricant. This will help reduce wear on your
string and cables. Inspect the string and cables regularly and replace them when there is evidence of
wear, every 5000 shots or every 12 months.
IMPORTANT: Before servicing any PSE bow in a bow press, back out each limb
bolt the maximum number of turns from bottom.
• Keep synthetic cables and strings waxed. Apply bow string wax to your synthetic cables and string
before each shooting session.
• Strings and cables must be replaced periodically. A worn cable or string can suddenly break
causing serious injury to the archer and damage to the bow. It is recommended that the string
and cables be replaced at least every 5,000 shots or 12 months.
PSE recommends that this work be performed by an authorized PSE dealer.
• Always store your bow in a cool dry place. High temperatures, such as those that can occur in
the interior of a vehicle, can cause serious damage to your bow.
• After use in high humidity or damp conditions, wipe metal components of your bow
with a light oil.
safety
As with any weapon, safe operation of your PSE bow must always be the highest priority.
ALWAYS WEAR SAFETY GLASSES WHEN HANDLING A BOW.
Do not attempt to use your bow without proper instruction.
Doing so can result in serious injury.
a. NEvER DRY-FIRE YOuR BOW. Dry-firing is drawing and releasing the bowstring without an
arrow on the string. Dry-firing will likely cause damage to the bow and serious injury to the
archer. In the event of a dry-fire, have an authorized PSE dealer inspect the bow
for damage.
b. Always be sure of your intended target as well as what lies behind the target area. An arrow can travel
a considerable distance, so it is important to have a safe and sound backstop.
c. If you draw a bow and need to let it down, do so in a slow and careful manner. Keep your
support arm straight and prepare for a rapid and violent let-down. Avoid hitting your hand on
protruding accessories such as the cable guard or quiver. Keep your head and face back and
out of danger during let-down. Never draw a bow with a peak weight above your comfort level.
Always use a wrist sling when drawing a bow.
d. Never modify any part of the bow or its components by drilling extra holes or removing material.
This voids the warranty and presents safety problems.
e. It is not recommended to time the bow using a draw board unless the draw board is operated by
a winch or other mechanical pulling device.
compound bow terminoloGy