Progressive Turf Equipment TD 65-2 Serial Up to 1265-21375 - Manual (Page 9)

6
MACHINE SPECIFICATIONS
DESCRIPTION TD65-2 (12’) TD65 (15.5’)
Recommended HP 25-40 30-50
Cutting Width 12 ft. 15 ½ ft.
Transport Width 7 ½ ft. 8 ½ ft.
Height 5 ½ ft. 7 ½ ft.
Length 14 ft. 14 ft.
Ground Clearance 9 ¼” 9 ¼”
Spindles 7 9
Blades 3 per Centre Deck
2 per Wing Deck
3 per Deck
Weight 2380 lbs. 2720 lbs.
Tongue Weight Transport 445 lbs. 580 lbs.
Mowing 235 lbs. 330 lbs.
Mowing Capacity MPH 2
4
6
2.9 acres/hr
5.8 acres /hr
8.7 acres/hr
Assumes no stops or overlaps
3.75 acres/hr
7.5 acres/hr
11.3 acres/hr
360 Degree Turn 24” uncut circle 0” uncut circle
Ground Pressure 7 PSI 8 PSI
Tire to Ground 310 square inches of contact Castors 15 X 6. NHS – 4 ply pneumatic tires.
Number of Tires 10 on decks, 2 on main frame Transport Tires 18 X 9.5 NHS – 6 ply turf saver tires.
Deck Drive PTO shaft to right angle gear
box driving 2-“B” section belts
to 3 heavy-duty spindles.
Hydraulics Requires 1 double acting outlet, all
hoses supplied to tractor.
Belt Adjustment Easily made by loosening four
bolts at gearbox base and
adjusting the slide plate
forward or backward for
retightening.
Deck
Construction
3/16” steel plate formed and welded
with supporting members at high
stress areas to achieve maximum
strength. Deck is 5” deep.
Cutting Height Easy to use spacer bushings
allow adjustment from 1” to 5”
in 3/8” increments.
Hitch 4 position, with height settings from
10 ½” to 15”. Safety chain with hook
according to Dept. of Transport
regulations.
Spindles 1 3/16” dia. (30 mm) spindle is
carried in 2 re-greaseable ball
bearings, which are housed, in
a precision machined hub.
PTO Shafts Telescoping agricultural PTO shafts,
with proper safety shields. 1 3/8” – 6
spline quick-disconnect yokes on
both ends with Ring Lock collars.
INPUT PTO – Category # 4
DECK PTO – Category # 2
Blades High lift, heat treated, alloy
steel - 5/16” x 2 ½” x 23”.
Optional: Low lift blades
Speeds Tractor PTO – 540 RPM
Blades – 3040 RPM
Blade Tip Speed – 18,287 FPM
Anti-Scalp
Rollers
Standard on front of wing
decks. Paint Finish Electrostatically painted with oven
baked finish.
Main Gearbox 4 shaft gearbox with 1 3/8 - 6
spline shafts
SMV Sign Located at back of mower for safety.
REAR DEFLECTOR AND MULCHING KITS AVAILABLE UPON REQUEST.
Design and specifications are subject to change without notice.