Progressive Turf Equipment Pro-Flex 120 14272040 And Above - Manual (Page 8)

Pro-Flex 120 Series Operator’s Manual
4
OSHA Training Requirements (USA)
The following training requirements have been taken from Title 29, Code of Federal Regulations Part
1928.57 (a)(6). www.osha.gov
Operator Instructions: At the time of initial assignment and at least annually thereafter, the employer
shall instruct every employee in the safe operation and servicing of all covered equipment with which he
is or will be involved, including at least the following safe operating practices.
In other jurisdictions:
It is good practice, following the initial instruction and at least annually thereafter, the employer shall
instruct every employee in the safe operation and servicing of all covered equipment with which he is or
will be involved, including at least the following safe operating practices.
ITEMS INCLUDED WITH PRO-FLEX 120 MOWER
Pro-Flex 120 Operator’s Manual & Parts List
Service instructions for PTO drive shafts and safety clutches
Blade balancer tool
Drive belt tensioner tool
SERIAL NUMBER LOCATION
The serial number plate for the machine is located on the left-hand
front frame.
For quick reference, record the following information:
Model: ________ Pro-Flex 120 ________
Serial Number: ___________________________
Date purchased: ___________________________
NOTE: The last digit in each PF-120/PFR-120 serial number is a
letter. This letter denotes the geographic destination of the mower.
D EU Regulatory Region
B Non- EU Regulatory Region
There are differences in the parts required to service your mower based on this geographic code as are
referred to throughout the parts lists. Always state this information when contacting your selling dealer
and when ordering spare parts.
REPLACEMENT PARTS INFORMATION
Use only Genuine Original Equipment Manufacturers (O.E.M.)
replacement parts. The use of “will fit” parts may reduce machine
performance, void machine warranties and present a safety hazard.
Use Genuine OEM parts.
UNAUTHORIZED MODIFICATION
Modifications to the original design of the Pro-Flex 120 mower, including the use of unauthorized
accessories or non-genuine OEM parts, may affect the reliability of the machine or make it unstable or
unsafe to operate and perform as originally designed and intended. Persons or organizations that make
unapproved modifications (including operation without provided guards and shields) assume all liability
arising from or related to the modification including any adverse affect on the machine.
No modification can be made to the original design or assembly of the Pro-Flex 120 mower (including
any and all attachments, safety or control devices) without the prior written consent of the Progressive
Turf Equipment Inc.
’s Engineering Manager (see contact information below). Progressive Turf
Equipment Inc. retains the right to reject all claims which arise from or are related to unauthorized
modifications.