Progressive Turf Equipment Pro-Flex 120 14272040 And Above - Manual (Page 35)

Pro-Flex 120 Series Operator’s Manual
31
CLEARING BLOCKAGES
If a deck discharge chute becomes clogged during mowing:
1) Stop the tractor and set parking brake.
2) Reduce engine speed to idle.
3) Disengage the PTO, let the mower come to a complete stop
and stop the engine.
4) Ensuring that the tractor engine is turned off, approach blocked
discharge chute and clear debris as required.
NEVER attempt to clear blockages with tractor engine running!
Always ensure the engine is OFF and the tractor parking brake is
set before clearing blockages.
STOPPING THE MACHINE IN AN EMERGENCY
All function of the Pro-Flex 120 mower is controlled through the
tractor. In the event of an emergency, follow the measures specified
by tractor manufacturer as outlined in the tractor operator’s manual.
TRANSPORTING THE MOWER
The Pro-Flex 120 mower is NOT designed for use on public
roadways. Use an appropriate transportation method such as a
trailer or float to move mower from site to site if required.
When transporting the Pro-Flex 120 from site to site, ensure the wings
and decks are in the raised position and wing and deck safety locks
are engaged.
Use an appropriate sized vehicle to tow the Pro-Flex 120 mower.
Do not tow with vehicles that are less than 1035lb, vehicle
handling and braking characteristics will be diminished.
TIE DOWN LOCATIONS
(3) Tie-Down provisions are located on the mower per the diagrams
below:
EACH SIDE