Datacard Group RL90 - Manual (Page 88)

Regulatory compliance
82 RP90 Plus E and RL90 User Guide
Regulatory compliance
Notice for USA (FCC notice)
This equipment generates, uses, and can radiate radio frequency energy. If it is not
installed and used in accordance with this instruction manual, it may interfere with radio
communications. This equipment has been tested and found to be within the limits for
Class B computing devices, pursuant to Subpart J of Part 15 of FCC rules, designed to
provide reasonable protection against radio interference in a commercial environment.
Operation of this equipment in a residential environment may possibly cause
interference. In the event of interference, the user, at their own expense, will be required
to take whatever measures are necessary to correct the problem.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Notice for Canada
This digital apparatus does not exceed the Class B limits for radio noise for digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe B prescrites dans le
Règlement sur le brouillage radioélectrique édicté par le ministère des Communications
du Canada.
The term “IC:” before the radio certification number only signifies that Industry Canada
Technical specifications were met.
Notice for Europe
We hereby certify that the Datacard® RP90 Plus E printer complies with EMC Directive
89/336/EEC and R&TTE Directive 1999/5/EC. This printer conforms to Class B of EN
55022 and to EN 301 489-5. Operation of this equipment in a residential environment
may possibly cause interference. In the event of interference, the user, at their own
expense, will be required to take whatever measures are necessary to correct the
problem.
Notice to Users of Printers Equipped with Contactless Smart Card
The contactless smart card reader emits radio-frequency waves and must be used as
installed and recommended by Datacard Group. You may not modify the reader or how it is
used without the written permission of Datacard Group. You may not operate the printer after
modifying the reader or its method of operation.