Datacard Group RL90 - Manual (Page 60)

Printer error recovery
54 RP90 Plus E and RL90 User Guide
Retransfer section jam
If a card jams in the retransfer section, “Jam (Transfer)” is displayed on the
LCD panel. To remove the jammed card:
1 Slide the door latch to the right and open the printer door.
2 Press the retransfer film cartridge eject button and remove the
retransfer film cartridge.
3 Open the card hopper and
remove the jog lever by
pushing the retaining tab
toward the front of the printer
and lifting the jog lever.
4 Use the jog lever to turn the
jog dial counterclockwise until
the card can be removed.
5 Remove the card.
6 Replace the retransfer film
cartridge and initialize the
retransfer film as described in
“Initialize the retransfer film”
on page 17
.
Tips – Retransfer jam
• Some internal parts may
be hot. Be careful when
removing a jammed card.