Datacard Group RL90 - Manual (Page 54)

Cleaning the printer
48 RP90 Plus E and RL90 User Guide
Preparing the printer and laminator for transport
Use saved packaging materials to prepare the printer and optional laminator
for transport. Transport includes moving the printer from one location to
another within the same facility.
1 Set the printer to transport mode using the LCD panel. See “Using the
Printer LCD panel” on page 36 .
2 Power off the laminator (if used) and the printer.
3 Disconnect the power and data cables from the printer.
4 Disconnect the power cable from the laminator (if used).
5 Disconnect the cable between the laminator and printer (if used).
6 Allow the unit(s) to cool down before preparing them for transport.
7 Remove cards from the printer card hopper.
8 Remove the printer ink ribbon cartridge and remove the ink ribbon from
the cartridge. Replace the empty cartridge in the printer.
9 Remove the transfer film cartridge and remove the transfer film from
the cartridge. Replace the empty cartridge in the printer.
10 Insert the head pad on the printer thermal head.
11 Remove the laminator cartridge and remove the laminator supply from
the cartridge.
12 Replace the laminator transport cushion and the empty cartridge in the
laminator.
13 Close all doors, including the input hopper.
14 Remove the output hopper.
15 Package each unit in the original shipping carton.
Note:
If the printer will not be used for a week or more, cover the
printer with the plastic shipping bag to keep dust and other
debris out of the printer.