Posiflex HS-2510W-TS - Manual (Page 9)

Abort
Note: The reading of the “Abort” barcode discards all the
parameters changed previously. However the
reading of the “Enter/Exit of Programming”
barcode is still required to exit the programming
mode.
Reset
Note: The reading of the “Reset” barcode turns all the
parameters back to the default values but leaves the
interface mode unchanged. It is suggested to scan
also the “RS232 Mode” barcode after this for the
scanner.
RS232 Mode
Note: Even if this scanner operates in the USB HID
mode, the HS-251xW-TS desktop POS
communicates with the scanner engine through the
RS232 interface.
9