Posiflex HS-2510W-TS - Manual (Page 8)

8
Problem Diagnostic Tips
The communication settings of the system
port and the scanner do not match. Adjust the
settings to make them match to each other. A barcode is read by the scanner but
not accepted by the POS system.
The scanner is not installed well. Contact your
dealer for the proper installation. The software
running on the POS system does not support
the data format of the barcode label.
PROGRAMMING CODES
All framed barcode names represent as default settings.
Please refer to the flow chart illustrated above for conceptual understanding.
Please cover the unwanted codes for scanning the specific barcode required for the
programming to prevent confusion in code scanning.
Use the download file from our global website for advanced programming.
Enter/Exit Programming Mode
Note: Scan this code to enter and exit the
programming mode. A slightly enlarged
image of this barcode is also printed on
the last page of this section for ease of
application.
Display Firmware Version
Note: The reading of the “Display Firmware
Version” barcode will read out the
firmware version and exit the
programming mode.