Posiflex JIVA KS-7212X - Manual (Page 8)

Part 8
CABLE ROUTING IN BASE
For cable routing in the mini slim base, please refer to
the picture at left. There is a cable tie inside the base
trunk as arrowed in the picture. Hold all the external
cables with the cable tie. Have all cables to pass through
the oval hole on the trunk as triangle marked to come out
of the front side of trunk.
Connect all the cable ends to
main unit. Should there is the option SATA HDD in
base installed, please double check that the HDD cables
must be still secured.
CUSTOMER DISPLAY UPGRADE KIT (OPTION)
Base Mount Pole Display
This terminal features a mini slim base,
and LCD customer display PD-309/U
or the VFD PD-2605/U can be attached
to either rear corner of base bottom.
Refer to the pictures at right. Use the 3
attached screws to
fix the metal base
plate of the PD to bottom plate of mini slim base at the
circled positions (the holes marked with “KS” on bottom
plate of PD against the holes marked “P” on bottom plate
of KS system). Connect the interface cable to go into the
base through cable exit arrowed at right to the main unit.
Rear Top Mount Customer Display
A
、 、 、 、 PD-310(U)/ 2604(U) Pole Display :
To mount the rear top mount upgrade kit like PD-310 or PD-2604 on the back
of the terminal, please apply carefully the 2
small fixation shoulder screws that come
along with PD-310/U or PD-2604/U to the
back of this terminal at the upper screw hole
circled in the right pictures. Please do not
screw them to the bottom. Hook the 2 most
left screw holes on rear bracket of the upgrade
kit arrowed in the picture onto the shoulder