Posiflex HT-4612X - Manual (Page 6)

Page 6
PCI EXTENSION CARD
The PCI extension card is not pre installed; therefore, it is a possibility to add a
PCI extension card. However, the whole operation will involve cautiously
accessing the interior of the system, replacing the slot window metal plate,
applying the card.
LCD DISPLAY (for HT-4600(E/X) only)
Push down the round plastic button at rear of the display base as circled in
right picture to adjust the display up and down. Release the button when done
will lock the panel firmly for application.
Pushing the rectangular shape plastic
button to its right toward the base center
allows user to adjust the display
horizontally for best view angle.
10” 2
ND
DISPLAY (OPTION)
When the HT-4600(E/X) series is ordered with the 2
nd
display monitor LM-2010 or when the LM-2010 is
ordered for PB-4600(E) to work as the primary monitor,
the monitor will be delivered in separate package from the
system unit. Please follow the Installation Guide in
package of the option. Then please open the system unit
and set the +12V DC supply in the VGA connector under
technical guidance from your distributor.
CUSTOMER DISPLAY (OPTION)
For HT-4600(E/X)/PB-4600(E) series, Posiflex provides
customer pole displays for terminal integration such as
PD-2601/2601U and PD-307/307U.
Please follow the
Installation Guide in package of the options. The
customer display will occupy one USB or COM port in the
connection area. Consult your distributor for technical
support on setting up the +5V DC or +12V DC supply to
the COM port used if the customer display is of the serial
interface type.
Push inward to
turn left-right
Push down to
turn up-down