OpenEye RADIUS v.4.05 - Manual (Page 25)

25
HEALTH CHECK SETUP
Health Check will monitor the status of connected DVRs and notify users of video loss, recording
failures or storage failures via e-mail alerts or trigger an audio warning to notify the Radius operator.
Set Up Health Check Options
1. From the Tools menu select Settings and then click Health Check Setup.
2. Select the Enable Health Check check box.
3. Define the check interval - 10 Minutes to 7 Days.
4. Select the appropriate check boxes to enable checks for Video Loss, Recording Failure, Disk
Free Space, and Storage Failure.
5. Define the number of occurrences that determines a warning or failure
Note
E-mail notification of warnings or failures can be set up in the Admin > E-Mail window. See
more information later in this chapter.
6. Select the check box next to the DVRs to include in Health Checks.
Note
Only selected DVRs will be monitored by the Health Check function.
7. Enter the Health Check Port number under DVR Information for Health Check and click Update.
The Health Check Port number is defined in Network setup on each recorder.
List of recorders added in DVR List Setup
Enable PPP for
selected DVR
Number of occurrences to
define a Warning / Failure Select modem used to
connect to DVR using
Incoming dialup
connection data
Test .wav file
Selected DVR
name