OpenEye G4 GraniteRack - Manual (Page 18)

18
CONFIGURING THE G4 GRANITERACK
The G4 GraniteRack has a built-in setup configuration utility with important information about the
configuration as well as settings for various optional functions on the subsystem.
INITIAL START UP
1. Ensure your G4 GraniteRack is connected to all necessary cables, and then push the power button
on the front of the unit.
2. When starting up for the first time, you will need to set your Country, Time and Currency, and
Keyboard layout. Set these items, and then click Next.
3. Type your Product Key. This can be found on the packaging.
4. Click Next.
5. Accept the licensing terms to complete the startup.
Logging in
OpenEye recommends changing the username and password on your G4 GraniteRack. The default
Username and Password are as follows:
Username: DVRAdmin
Password: dvr4321
Changing Your Password
To change the username and password, follow these instructions.
1. To change your password, press CTRL+ALT+DEL, and then click Change Password.
2. Type your Old Password.
3. Type your New Password.
4. Type your new password again in the Confirm Password field, and then press ENTER.