Reportstar, Smart information – OpenEye Gen6 X-Series User Manual
Page 77
78
1.
Set up the
General
and
Users
tabs first.
2.
Click the
ReportStar
tab.
3.
Select
Use ReportStar
.
4.
Enter a numeric
Security Code
if desired
(this is an additional security measure to
prevent unauthorized users from adding the
recorder to their Report Star account).
5.
Define the
Send Time
to designate the time
the recorder will send updates to Report
Star.
6.
Select
Send notification to Report Star on
alarm events
if you want the recorder to
report alarm events to Report Star.
7.
Type a new
MAC Address
if necessary.
8.
To set a custom time to send updates to
ReportStar, select
Custom Day/Night
, and
then select your desired
Day
and
Night
times.
9.
To send updates to a custom URL, select
Send to Custom URL
, and then type in the
URL.
Note
The
Resize Images
check box will reduce the size of ReportStar images to conserve
bandwidth when checked. To keep ReportStar images at their original resolution, leave the
box unchecked.
SMART Information
The SMART Information tab displays
Hard Drive information.