OpenEye Gen6 X-Series - Manual (Page 55)

56
To access the General Setup window, click Setup in the Live screen, and then click General Setup .
Audio
The Audio tab allows you to configure audio channels, audio playback, and set a voice warning.
System Volume
1. Click Volume to adjust the volume of your system.
2. Use the slider, enter a value, or click Mute to disable audio playback.
3. Click OK .
Audio Channels
1. Select an Audio Chanel .
2. Select Record and Use Live Audio , as desired.
3. Adjust the gain and Live Volume for each channel, depending on your desired output and
microphone sensitivity.
4. Click Apply to save your settings.
Audio channels list
Select an
audio for use
with alarm or
sensor event
Control gain and live
audio volume for the
selected audio channel