OpenEye Gen6 X-Series - Manual (Page 106)

32539AF 107
Scheduled Backup Overview
The Scheduled Backup Screen is used for performing bulk backup of video recorded by all cameras on
a regular scheduled basis (1-24 hours). The Scheduled Backup Screen is similar to the General Backup
Screen.
In order to use the Scheduled Backup feature, you must first activate the function for your Server
software. You only need to do this once to enable scheduled backups.
1. On the Live screen, click Exit , and then select Restart in Windows Mode .
2. Click OK .
3. Click Start , and then click vFormat .
4. In the Need for Scheduled Backup area, click Confirm Windows System Password .
5. Type your Windows System ID and Password .
Note The default ID is DVR Admin, and the default Password is dvr4321.
6. Click OK .
7. Close the DVR Utility window, and then double-click OpenEye Server to restart your Server
software.
In order to use the Scheduled Backup feature one or more
storage drives or partitions connected to the recorder must be
specified as a backup drive.
1. On the Live screen, click Exit and choose Restart in
Windows Mode .
2. Double-click Computer .
3. Right-click on the drive to specify as a backup drive for
Scheduled Backup and click
Rename . Rename the drive to
‘Backup’. Repeat this process for all drives to use for
Scheduled Backup. To remove a drive from use for
Scheduled Backup, change its name to something other
than
‘Backup.’
4. Restart the application and return to the Schedule tab in the
Backup Center window.
Note The C: Drive CANNOT be used as a backup location;
this is done intentionally to protect the operating
system.