OpenEye Gen6 X-Series - Manual (Page 46)

32539AF 47
1. On the Display screen, click Setup .
2. Click Camera Setup, and then click IP Cameras.
3. Click Find Camera to automatically find all connected Network cameras.
4. Select the check box next to your desired camera.
5. Type the User ID and Password of the device.
6. Click Add Selected .
7. The camera will appear in the Camera Setup tab.
8. Double-click in the Channel field, and then select the Channel you want to assign this camera to.
9. Click Apply .
OpenEye recommends assigning a descriptive name to each camera channel for easy identification of
where the camera is located. To name your IP camera channels, follow these instructions.
1. On the Display screen, click Setup .
2. Click Camera Setup, and then click IP Cameras.
3. Click the Camera Setup tab.
4. Double-click the Device Name column for the camera you want to name.
5. Type a name for your camera.
6. Click Apply to save the name.
Server softare allows you to inport IP camera configuration settings and apply them to your cameras.
You can also export IP camera configuration settings for backup purposes, or so the configuration can
be used elsewhere. The configuration settings files are CSV files.
To export IP camera configuration settings from Server Software:
1. On the Display screen, click Setup .
2. Click Camera Setup, and then configure your IP camera list as desired.
3. Click Export.
4. Name your .csv file and then click Save.
To inport IP camera configuration settings to Server Software:
1. On the Display screen, click Setup .
2. Click Camera Setup, and then click Inport.
3. Identify the .csv file that you want to import, and then click Open.