Analog camera setup, Set up new camera – OpenEye Gen6 X-Series User Manual
Page 41
42
Select Channel
Select the camera channel to be edited.
Selected Camera Display
View the live camera feed from the selected camera channel.
Sensor Connection
Specify which sensors to associate with the camera selected.
Camera Name
Specify the name of the selected camera.
Set Up New Camera
1.
Use a BNC cable to connect your camera to the rear of the recorder chassis.
2.
On the Display screen, click
Setup
.
3.
Click
Camera Setup
, and then click
Anaog Cameras
.
4.
Click the
General Camera
tab.
5.
Select the channel that corresponds with the new camera from the
Select Channel
list.
6.
Enter a name for the camera in the
Camera Title
field.
7.
Adjust the
Brightness
,
Hue
and
Contrast
if necessary.
8.
Select the appropriate
Sensor Connection
camera.
9.
Click
Apply
to save your settings.
Adjust
Brightness
Hue
Contrast
Apply system defaults to
all cameras
Selected
camera
display
Apply system defaults
to selected camera
Apply current settings to
all cameras
Connect
selected
camera to
associated
sensors
Define camera name