OpenEye Gen6 N-Series - Manual (Page 98)

32521AD 99
These instructions are for Active Directory Integration with Server Software version 3.6.36 and above.

The recorder does not need to be joined to the domain. The recorder will query the Active
Directory server for accounts and authorization levels.

The recorder creates groups within Active Directory for each of the permissions on the
recorder. Simply join a domain user to these groups to provide access to that function in the
recorder.

Recorder access within Active Directory is based on the Site Code within the recorder
software. This allows an administrator to group recorders with the same Site Code.

Remote and Multi-Site management software works with Active Directory logins.
Required Items

Name of Active Directory server.

Account in Active Directory server that has Domain Admin rights. This user will be used initially
to create the Organization Units (OUs) and Groups within Active Directory.
1. Verify that the recorder is connected to a network that has a valid Active Directory server.
Ensure that the TCP/IP settings are configured correctly for DNS resolution and gateway if needed.
Check to verify that you can ping the Active Directory server without issues.
2. Set up DVR Site Code to be used for Active Directory authorization. The default will be 100-000.
This site code can be used to group recorders together within Active Directory.
a. Log in to the recorder using the local recorder administrator account (non-Active
Directory).
b. Click Setup , and then click System Information . Change the Site Code as required.
3. Log on to the recorder server with the
domain account with administrator
privileges (see above required items).
If successful, the recorder will log the
administrator user on without any error
messages. You may log off the recorder
once this is completed without errors.
Note If you encounter an error please
verify that the above required items
are correct.