OpenEye Gen6 N-Series - Manual (Page 42)

32521AD 43
Using the Graphical PTZ Controller
1. In the Display screen, click Pan/Tilt .
2. Click the viewing area of the PTZ camera you want
to control.
3. Use the Arrow buttons to control the direction of the
PTZ camera.
4. To select a new camera, click the video display of a
different camera on the Display screen display.
Note Eight directions are available only for select
cameras. Only four of the PTZ Control buttons
work for all protocols (UP, DOWN, LEFT,
RIGHT).
Note The Advanced menu panel on the graphical
PTZ controller can be used to set PTZ preset
positions (on supported cameras), as well as
move to presets up to 254.
5. To exit the Graphical PTZ Controller, click Pan/Tilt
again.
Open & close
the Advanced
Controls panel
Current
camera
channel
Arrow buttons
Move to
preset
positions 1-10
Set presets,
and move to
presets 11-254
Open the
camera menu