OnLine Power Power Wave 4 - Manual (Page 44)

6005-145 Rev. A 3-4
3.2 Unpacking
Carefully unpack the ELI, and then carefully locate the ELI onto the site which has
selected, with all the points in section 3.1 kept in mind.
The ELI has had detailed production and QC testing of all the electrical and mechanical
characteristics prior to shipment from the factory. Therefore, the ELI should be in
proper condition upon receipt. Once received, the ELI should be first checked visually
to determine if any physical damage has occurred during transportation.
Then check to insure that all the accessories/options (match with your purchase order)
have been included.
- DOOR KEY
- THIS INSTRUCTION MANUAL
- BATTERY FUSE (FOR BATTERY CABINET ONLY)
- SPARE SCREWS FOR COVER PLATE
- SPARE SCREWS FOR CONNECTION TERMINALS etc.
Lastly, check to insure that the specification of the ELI is identical to the specification
of your order. The key items in the specification you must check are:
- RATED POWER OF THE ELI,
- INPUT VOLTAGE & FREQUENCY
- OUTPUT VOLTAGE & FREQUENCY
- NO. OF OUTPUT PHASES (1Φ OR 3Φ)
- BATTERY VOLTAGE OR CELL NO.
Also check to insure that the necessary documentation is attached:
- GUARANTEE CARD
- AGENT/SERVICE CENTER INFORMATION