Omnia Audio Omnia.ONE User Manual

Page 93

[AES A Pol] (AES/EBU Digital Output Polarity for the Left Channel)

[AES B Pol] (AES/EBU Digital Output Polarity for the Right Channel)

[LW A Pol] (Livewire Output Polarity for the Left Channel)

[LW B Pol] (Livewire Output Polarity for the Right Channel)

[Asym Mod] (Assymetrical Modulation)

Asymmetrical positive modulation is possible by adjusting the Asym Mod
parameter to some value other than 100%. This will increase the modulation on
positive peaks only. The range of adjustment allows asymmetry up to 150% of
the negative modulation value.

NOTE: Be sure the output polarity is set / wired properly for your transmitter. If
it is wrong, this control can increase negative peaks instead!

[LPF Freq] (Low-Pass Filter Frequency)

This control adjusts the cutoff frequency of the Omnia’s post clipper NRSC-
compatible low pass filter.

Cutoff frequency settings of 4.5, 5, 5.5, 6, 7, 8 and 10 kHz are available.

The following spectrograph displays the performance of the 10kHz NRSC-compliant low
pass filter:

[Tilt EQ] (Tilt Equalization)
[Tilt Freq] (Tilt Frequency)

Low frequency tilt and equalization controls have been provided after the Omnia.ONE
AM’s clipper section in order to compensate for certain design deficiencies in older