Nortec ME Direct Feed Installation - Manual (Page 6)

6 For your safety
2 For your safety
General
Every person working with the Nortec ME Direct Feed must have read and understood the installation
manual and the operation manual of the Nortec ME Direct Feed before carrying out any work.
Knowing and understanding the contents of the installation manual and the operation manual is a basic
requirement for protecting the personnel against any kind of danger, to prevent faulty operation, and to
operate the unit safely and correctly.
All ideograms, signs and markings applied to the unit must be observed and kept in readable state.
Qualification of personnel
All work described in this installation manual
may only be carried out by specialists who are well
trained and adequately qualified and are authorized by the customer.
For safety and warranty reasons any action beyond the scope of this manual must be carried out only
by qualified personnel authorised by the manufacturer.
It is assumed that all persons working with the Nortec ME Direct Feed are familiar and comply with the
appropriate regulations on work safety and the prevention of accidents.
Intended use
The Nortec ME Direct Feed is intended exclusively for
air humidification and air cooling in AHU's or
air ducts within the specified operating conditions (see operation manual Nortec ME Direct Feed). Any
other type of application, without the written consent of the manufacturer, is considered as not conforming
with the intended purpose and may lead to the Nortec ME Direct Feed becoming dangerous.
Operation of the equipment in the intended manner requires that all the information contained in this
installation manual are observed (in particular the safety instructions).
Danger that may arise from the Nortec ME Direct Feed
DANGER!
Risk of electric shock!
The optional Nortec ME control units contain live mains voltage. Live parts may be exposed
when the control unit is open. Touching live parts may cause severe injury or danger to life.
Prevention: The control unit must be connected to the mains only after all mounting and installation
work has been completed, all installations have been checked for correct workmanship and the covers
has been relocated properly.
WARNING!
Some type of evaporative material is manufactured from glass fibre. Though this material is not classi-
fied as hazardous, it is recommended that Personal Protection Equipment such as gloves, protective
clothing and eye protection are used during handling to protect the user from fibres or dust. If dust is
generated during handling it is recommended that respiratory protection is worn.