Nortec LiveSteam v.2 - Manual (Page 23)

LS Installation Manual | 20
Step 6
1. Thread Extension Assembly
from Step 4 on to valve stem.
2. Hand tighten as far down as
possible.
3. Manually position the valve in
the fully open position.
Figure 29: Step 6
Step 7
Pre-loading Actuator:
1. Insert Hex wrench as
illustrated.
2. Rotate 1 ½ turns counter-
clockwise.
3. Lock Actuator by turning
locking mechanism clockwise with
a slotted screwdriver.
Figure 30: Step 7