Nortec LiveSteam v.2 - Manual (Page 21)

LS Installation Manual | 18
Step 6
1. Refer to wiring diagram for wiring instructions.
2. Apply power to actuator and ensure proper operation of valve and actuator.
3. Ensure proper response to control signal.
Dura Drive P/N Nortec P/N Assembly Instructions
MS61-7203 DURA
DRIVE ACTUATOR
150 7556 0-10VDC,
150 7557 4-20mA,
150 7558 On/Off
For 1”- 2” St. St. Valves, for incoming pressures
from 2 to 50 psi
Step 1
Ensure all components are
accounted for:
1. Actuator
2. Hex Wrench
3. Stem Extension Kit
4. Linkage Assembly
Figure 25: Step 1
Step 2
Linkage Kit Includes:
1. Connecting Pin
2. Stem Extension
3. Large Lock Washer
4. Small Lock Washer
5. Nut (Not Used)
6. Sticker
Figure 25: Step 1