Denon DVD-2500BTCi - Manual (Page 34)

31
Function Setup Function Setup
ENGLISH
ENGLISH
Speaker Setting
This unit allows you to enjoy multi-channel surround sound such as 5.1-channel / 7.1-channel
surround.
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available in Setup
A Quick A HDMI Audio Out A HDMI Multi(LPCM) or
Setup A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM).
How to navigate through the “HDMI Multi(LPCM)” setting
1) Use [U / V] to select the menu item.
2) Use [U / V] to select setting items.
• Use [RETURN] to go back to the previous screen.
3) Use [Y / Z] to select desired options.(Except for “Test Tone” and “Default”.)
For “Test Tone”:
Use [Y / Z] to select “Manual” or “Auto”, then press [ENTER].
• The test tone will be output. If you select “Manual”, use [U / V] to select desired speaker, then use
[Y / Z] to adjust the volume. If you select “Auto”, use [Y / Z] to adjust the volume of the speaker
that output the test tone.
• If you want to stop the test tone, press [RETURN].
For “Default”:
Press [ENTER] to reset the “Delay Time” setting to the default.
4) Press [SETUP] to exit.
Front speaker (left)
Surround speaker (left) Surround speaker (right)
Surround back speaker (left) Surround back speaker (right)
Front speaker (right)
Center speaker Subwoofer
Menu Setting items Options Descriptions
Speaker Configuration
Select the desired
speaker to set. Then
change the setting
appropriately by
referring to the
descriptions. Front Large* Large:
For the large speakers
with strong low frequency
reproduction capabilities.
Small:
For the small speakers
which do not provide
strong bass sound
None:
No speakers.
For “Subwoofer” there is
only “On” or “Off”.
Small
Center Large*
Small/None
Subwoofer On*
Off
Surround Large*
Small/None
Surround Back Large*
Small/None
Channel Level
Test or set the volume for
each speakers. Test Tone:
“Test Tone” is the
test tone which can
be out put from the
speakers so that you
can adjust the
volume for each
speaker. Off* Select “Off” to deactivate
the “Test Tone” feature.
Select “Manual”, then
press [ENTER] to manually
set the volume for the
desired speaker.
Select “Auto”,then press
[ENTER] to automatically
out put the test tone from
each speakers.
Manual
Auto
Front Lch 0 dB to -12 dB If you have selected
“Manual” in “Test Tone”,
select the desired speaker
to set and adjust the
volume for the selected
speaker.
If you have selected
“Auto” in “Test Tone”,
adjust the volume while
the desired speaker is
outputting the test tone.
Center 0 dB to -12 dB
Front Rch 0 dB to -12 dB
Surround Rch 0 dB to -12 dB
Surround Back Rch 0 dB to -12 dB
Surround Back Lch 0 dB to -12 dB
Surround Lch 0 dB to -12 dB
Subwoofer 0 dB to -12 dB
E5E01UD_EN.book Page 31 Wednesday, November 28, 2007 2:16 PM