Denon DVD-2500BTCi - Manual (Page 15)

12
Playback
ENGLISH
ENGLISH
Playback
DVD-2500BTCI BLU-RAY DISC PLAYER
HDMI RESOLUTION SD CARD ON / STANDBY
A
[U / V / Y / Z]
C
[POWER ON]
B
[ENTER]
A B C
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Direct Playback
1 Press or [POWER ON].
2 Turn on the display device and select the HDMI
input on the device.
3 Press A to open the disc tray.
4 Place the disc on the disc tray with its label side
facing up.
5 Press A to close the disc tray.
Some discs may start playback automatically.
6 Press B to start playback.
For many of BD-video and DVD-video, a menu screen
may appear.
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].
7 Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 14.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning off the unit.
DVD-V DVD-VR CD BD-V
Align the disc to the
disc tray guide.
It may take a while to load
the disc.
Note
• may appear at the top-right on the screen when the
operation is prohibited by the disc or this unit.
• During the playback of 2-layered disc, pictures may stop for a
moment. This happens when the 1st layer switches to the
2nd layer. This is not a malfunction.
• The operation may vary when you play back BD/DVD with
disc menu. Refer to the manual accompanying the disc for
details.
E5E01UD_EN.book Page 12 Wednesday, November 28, 2007 2:16 PM