Dynex DX-PDP42-09 - Manual (Page 22)

22 Maintaining your TV
Changing TV settings
To change the TV settings:
1 Press MENU. The main (Video) menu opens.
2 Press or to select the TV menu icon. The TV menu opens.
3 Press or to select the option you want to change or the
sub-menu you want to open. Options include:
• Channel Scan—Press ENTER to automatically scan for
receivable channels and create a channel list.
• Tuner Mode—Toggles between the available tuner modes.
Choices are AIR and Cable.
• Channel Skip—PressENTER to open the Channel Skip
sub-menu. When the sub-menu opens, press to select
the channels you want, then press ENTER repeatedly to hide
(with a check mark in the box), or show (without a check
mark) the channel. Repeat as necessary.
• Favorite List—Press ENTER to open the Favorite List
sub-menu. When the sub-menu opens, press to select
the channels you want on your favorite list, then press
ENTER to show (with a check mark in the box), or hide
(without a check mark) the channel. Repeat as necessary.
4 Press or to change the setting of the selected option.
5 Press EXIT to close the menus and return to normal viewing.
Maintaining your TV
Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution
Make sure that you turn the power off and unplug the power cord
before you begin any cleaning.
Cleaning the screen
Wet a soft cloth in a mixture of luke warm water and a little fabric
softener or dishwasher detergent. Wring the cloth until it’s almost dry,
and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air dry
before you turn on your TV.
Cleaning the cabinet
Wipe the front panel and other exterior surfaces of your TV with a soft,
dry, lint-free cloth. Never use a solvent or alcohol to clean your TV. Do
not spray insecticide near your TV. Such chemicals may cause damage
and discoloration to the exposed surfaces.
Troubleshooting
Operation
Video problems
Picture Mode Normal
Contrast 50
Brightness 50
Saturation 50
Hue 0
Sharpness 4
Color Temperature Natural
Noise Reduction Medium
Video Enter Select Exit
Channel Scan
Tuner Mode Cable
Channel Skip
Favorite List
TV Enter Select Exit
Problem Solution
Remote control
does not work • Remove obstacles between the remote control
and the player.
• Point the remote control at your TV’s IR sensor.
Install fresh batteries.
Power turns off
suddenly • Make sure that the sleep timer is not set.
• Check the power control settings.
Problem Solution
No picture or
sound • Check all cable connections.
• Make sure that your TV is turned on.
• Try another channel. It may be a broadcast
problem.
• Check your antenna connection, location, or
direction.
• Make sure that the power connection is okay.
Check the wall power outlet.
Picture appears
slowly when
your TV is turned
on • It is normal for the image to be muted during
the startup process. If the picture does not
appear after five minutes, call your Insignia
service center.
Picture is
satisfactory, but
no sound • Check the volume level and mute setting.
No color, poor
color, or poor
picture • Check the picture control and adjust color.
• Make sure you have provided a sufficient
distance between the TV and VCR.
• Try another channel. The problem may be the
broadcast.
• Make sure the video cables are connected
correctly.
• Check the power saving feature and restore the
brightness of your TV.
• Check the program's color features. The
problem may be that it is a black and white
movie.
Poor reception
on some
channels • Check the antenna and its connection. If there
are problems, correct them. If all connections
are tight, the problem may be with a faulty
antenna or cable.
• The station or your cable TV provider may be
experiencing problems.
• Check for sources of interference.
• Re-orient your antenna for better reception.
Stripes or bars on
picture • Check for interference from other electronic
devices, such as radios and televisions, and
keep magnetic or electronic devices away from
your TV.
• Check your antenna connection, location, or
direction.