Dynex DX-PDP42-09 - Manual (Page 19)

Using your TV 19
Setting channel blocking
To set up channel blocking:
1 Press MENU. The main (Video) menu opens.
2 Press or to select SETUP. The Setup menu opens.
3 Press or to select Parental, then press ENTER. The
password screen opens.
4 Enter your four-digit password (the factory preset password is
0000). The Parental sub-menu opens.
5 Press or to select Channel Block, then press ENTER to
enter the sub-menu. The Channel Block sub-menu opens.
6 Press or to select the channel you want to block, then
press ENTER to block the channel.
A lock icon appears in the box opposite any channel you block.
7 Press MENU to exit the sub-menu, then press EXIT to close the
menus and return to normal viewing.
Setting input blocking
To set up input blocking:
1 Press MENU. The main (Video) menu opens.
2 Press or to select SETUP. The Setup menu opens.
3 Press or to select Parental, then press ENTER. The
password screen opens.
Picture Mode Normal
Contrast 50
Brightness 50
Saturation 50
Hue 0
Sharpness 4
Color Temperature Natural
Noise Reduction Medium
Video Enter Select Exit
OSD Language English
Time Setup
Closed Caption
Parental
Gamma Middle
Audio Only
Reset Default
Setup Enter Select Exit
Password ****
Parental Back
Program Block
Channel Block
Input Block
Open V-Chip
Change Password
Parental Enter Select Back
2 Analog
3 Analog
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
Channel Block Enter Select Exit
Picture Mode Normal
Contrast 50
Brightness 50
Saturation 50
Hue 0
Sharpness 4
Color Temperature Natural
Noise Reduction Medium
Video Enter Select Exit
OSD Language English
Time Setup
Closed Caption
Parental
Gamma Middle
Audio Only
Reset Default
Setup Enter Select Exit
Password ****
Parental Back