Nevion Multicon MRP - Manual (Page 37)

Modular Routing Protocol - MRP Rev. L
nevion.com | 37
9.4 Bus list
A router is connected to the controller on some physical connection. This is called a bus in
this protocol. A bus can have zero to many routers connected. This command lists each
router in the controller and which bus they are connected to.
Command:
blist[*CC]
Response:
? "blist"
[*CC]
Where
=[
]
=r b[ {local|remote}[
][ ]
={internal|serial|tcpip[ :]}
={ncb|modular|triton|probel-sw-p-88|leitch-pass-through}
9.5 Module list
Some routers are built up by modules. This command lists all modules in this router.
Command:
mlist[*CC]
Response:
? "mlist"
m b
9.6 List input configuration and status
Lists each input's configuration and status.
Command:
sin b[*CC]
Response:
? "sin b"
[in b m
[eq={unknown|enabled|bypass}]
[signal={unknown|no|yes}]
]
[in …]
[*CC]