Nevion Multicon MRP - Manual (Page 18)

Modular Routing Protocol - MRP Rev. L
nevion.com | 18
Example:
Command: Response:
salvolist
sg1 ? "salvolist sg1"
salvo sg1 0 "Monitors" "Monitor wall" "MONs" ""
salvo sg1 1 "Cameras" "Camera setup" "CAM" ""
salvo sg1 2 "Editing" "Machine control routing" "EDIT" ""
salvo sg1 3 "Oslo link" "Contribution from Oslo" "OSL" ""
salvo sg1 4 "Bergen link" "Contribution from Bergen" "BGN" ""
5.12 Listing available parameters
List all parameters in a parameter group, analogue to levels for crosspoints.
::= 'parlist' 'pg'
::= [ {}]
::= 'par' 'pg'
[]
::= ||
::= 'enum' '"''"'{',' '"''"'}
::= 'bool'
::= 'fixedpoint' ['s'] 'u'
'l' ['d' '"''"']
::= 'rw'|'r'
::= 'trunc'|'wrap'
Parameter index (in group). May be an arbitrary value in some
implementation, do not assume it to be sequential.
Name/description of selectable option
All values are a multiple of this increment. Assumed to be 1.0 if not
specified
Upper limit for value
Lower limit for value
Value is read-write
Value is read-only
trunc
Leaves value at upper or lower limit if a value or increment outside
permitted range is attempted.
wrap Continues for remainder of increment from opposite limit if upper or
lower limit is reached. Typical use: phase adjustment in degrees.
Unit (dimension) of variable